Heating and Cooling Maintenance Services

Preventative Maintenance Program

These services are performed during a typical inspection and preventative maintenance visit.

Air Conditioning Equipment

• Lubricate fan bearings as needed.
• Inspect and adjust belts as needed.
• Inspect filters and clean if washable.
• Visually inspect equipment for signs of refrigerant leaks.
• Check indoor evaporator coil clean as needed.
• Check outdoor condenser coil clean as needed.
• Change batteries in thermostat if needed.
• Inspect and clean drain pan and drain line.
• Check electrical connections and components – tighten loose connections.
• Perform operational check and make operational log.
• Check zone dampers.
• Refrigerant pressures.
• Volts and Amps.

Oil and Gas Heating Equipment

• Lubricate fan and motor bearings as needed.
• Inspect and adjust belts as needed.
• Inspect filters and clean as needed.
• Visually inspect equipment.
• Remove nozzle and oil filter(oil).
• Check and adjust oil pump pressure(oil).
• Clean and adjust electrodes(oil).
• Check electrical connections and components – tighten loose connections.
• Check and lubricate water pumps as needed.
• Perform and log efficiency.
• Inspect venting.
• Check & lubricate water pumps as needed if hydronic system.
• Change batteries in thermostat if needed.
• Check zone dampers.
• Check and adjust gas pressure(gas).
• Check Combustion blower(gas).
• Adjust flame as needed(gas).

Humidification Equipment

• Replace atomizer nozzle or distributor pad as needed.
• Clean the water sump.
• Check operation.

Power Venting Equipment

• Check operation and safeties.
• Lubricate motor to manufacturer’s specification.

Not included in the inspection and is billed as an extra

• Chemical used for cleaning evaporator coils and condenser coils.
• Replacing and electrical parts.
• Filters and fuel pumps.
• Cleaning of heat exchanger.

Written Report:

will provide to customer representative upon completion of each regular inspection of emergency call.

Emergency Service:

This coverage includes the priority scheduling for 24-hour emergency service for contract customers only.

Parts and Labor Discounts:

Contract Customers who’s accounts are current will receive a 5% discount on parts and labor for and service calls for covered equipment.